|
|
|
|
|
WATER REPELLENTS OF SURFACE |
|
|
 |
PELICOAT WALL |
|
|
|
|
|
|
|
|
|
|
|
|
|
PELICOAT WALL is a water repellent of surface intended to waterproof the walls and the frontages of rise. It is a complex and exclusive formula of the family of the polyméthyls hydroxy siloxanes. Its properties are spectacular and multiple in the field of the protection of surfaces.
PELICOAT WALL preserves its effectiveness during more than 5 years. This is confirmed by the Scientific and Technical Center of Construction, ratio OF 577032/02. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Principle of operation |
|
|
|
|
|
|
PELICOAT WALL, while penetrating deeply in the stone by capillarity (1 cm on average) papers the microscopic pores and prevents water penetrating in materials, and thus stagnating there or from bringing to it dust and dirtinesses.
The protective film is microporous to 100 % and thus lets breathe the wall, while letting pass the water vapor. Colourless, it does not deteriorate of anything the initial aspect materials. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Advantages of the treatment |
|
|
Characteristics |
|
|
|
- Protects durably from water, the effects of freezing, pollution.
- Delays the development of the ship's boys and moulds.
- the heat insulation Increases.
- hygiene Improves of the rooms by removing the infiltrations of moisture.
- applies easily, to all the supports.
- Allows all the gaseous exchange and thus lets breathe to 100 % materials.
- Removes the infiltrations due to the faience manufacturing of certain coatings.
- Can apply to a slightly wet support.
- From its composition, can be applied to approximately of 5 C and penetrates in the stony heart. Does not arise if the temperature drops just after the application. |
|
|
- colourless Liquid
- pH : 6 (+-0.5)
- Not flash : 51.6C
- Nonaggressive
- Density : 0.75
- active Matters : 5% |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Application |
|
|
|
|
|
|
By pulverization, to the brush or the roller, PELICOAT WALL applies without specific protection of the panes or the windows, to simply wipe the parts covered with product with a dry rag.
The application must be done preferably upwards, in only one layer, until repression of the treated support. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Examples of use |
|
|
|
|
|
|
Bricks, concrete, cement, tiles, breeze blocks, roofs out of zinc, stones of size… |
|
|
|
|
|
|
|
|
|
