|
|
|
|
|
DAMP-PROOF OF SURFACE (guaranteed 10 years). |
|
|
 |
PELICOAT PRO WALL |
|
|
|
|
|
|
|
|
|
|
|
|
|
PELICOAT PRO WALL is a water repellent of surface intended to waterproof the walls and the frontages of rise. It is a complex and exclusive formula of the family of poly-siloxanes. Its properties are spectacular and multiple in the field of the protection of surfaces. PELICOAT preserves its effectiveness during more than 10 years. This is confirmed by the Royal Institute of the Artistic Inheritance, report/ratio N 2L13DI 96/5860. It belongs to the file of the Research Laboratory of the Historic buildings. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Principle of operation |
|
|
|
|
|
|
PELICOAT PRO WALL, while penetrating deeply in the stone by capillarity papers the microscopic pores and prevents water penetrating in materials, and thus stagnating there or from bringing to it dust and dirtinesses.
Protection is microporous to 100 % and thus lets breathe the wall, while letting pass the water vapor. Colourless, it does not deteriorate of anything the initial aspect materials. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Advantages of the treatment |
|
|
Characteristics |
|
|
|
- Protects durably from water, the effects of freezing, pollution.
- Delays the development of the ship's boys and moulds.
- the heat insulation Increases.¶
- hygiene Improves of the rooms by removing the infiltrations of moisture.¶
- applies easily, to all the supports.¶
- Permeable with the water vapor at a rate of 100 %
- Removes the infiltrations due to the faience manufacturing of certain coatings.
- Can apply to a slightly wet support.
- From its composition, can be applied to approximately of 5 C and penetrates in the stony heart.¶Does not arise if the temperature drops just after the application. |
|
|
- colourless Liquid
- pH : 7 (+-0.5)
- Not flash : 53C open cup
- Flash point : Cleveland 58C
- Nonaggressive
- Density : 0.75 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Application |
|
|
|
|
|
|
By pulverization or to the brush, PELICOAT PRO WALL applies without specific protection of the panes or the frames, to simply wipe the parts covered with product with a dry rag.
The application must be done preferably upwards, in only one or several successive layers, until refusal of the treated support. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Examples of use |
|
|
|
|
|
|
¶Bricks, concrete, cement, tiles, breeze blocks, roofs out of zinc, stones of size..... |
|
|
|
|
|
|
|
|
|
