Home
Products
Technical supports
About Us
References
Contact

FOR BUILDING

ANTI GRAFFITIS
Pelicoat Pro Stone
Pelicoat Anti Graff

WATER PROOFER
Pelicoat Pro Wall
Pelicoat Wall
Pelicoat Pro Jet

MINERALIZING

Pelicoat Pro Roc

CLEANING
Pelicoat Pro Moss
Pelicoat Pro Clean
Pelicoat Déca Pierre
Pelicoat Déca Brique
Pelicoat Neutrapierre
Pelicoat Neutrabriq
Pelicoat Décapeint
Pelicoat Décasil
Pelicoat Décap NF
Pelicoat Alunet
Pelicoat Déca Graf


FOR GROUNDS
Pelicoat Pro Stone


FOR TEXTILE
Pelicoat Textile

DECAPANT ELIMINATION OF SILICATES
PELICOAT DECA SIL
Our pickling solution reference 713 is especially studied for the elimination of the coats of mineral paint to silicates applied to the stone.

The product is a thixotropic gel in aqueous phase with high capacity sticking and migrating on the support to pickle. Its action is slow.
Characteristics
- Aspect : Sticking freezing, Without odor
- Color : Brown
- pH : 14
- Density : 0,925
- corrosive Substance, without solvent
- Biodegradable, Non flammable
Application
The product applies to the brush or the spatula to a slightly moistened support.
- To extend the product, to then apply to treated surfaces a standard plastic film polyane which will avoid the evaporation of the product and will oblige by forced convection, active substances with pénétret within the mineral coating to eliminate.
- To let act 2 to 3 days.
- To rinse abundantly with water under pressure.
- freezing being strongly basic, it can be useful to neutralize the surface treated with neutralizing 204 diluted with 1 per 10.
- not to apply in full sun, to a hot surface, or if the temperature is lower at 10 C.
- We recommend to you to pay attention to projections on surfaces sensitive to the action of the alkaline products (metal surfaces, panes, plastics, wood, painted surfaces).
- To protect if necessary.

Remarks
After scouring, a soft mechanical treatment of the gumming type is highly advised for the elimination of the possible residual tasks.
Consumption
The thickness of the treatment on the substrate must be 3 to 5 mm.
The average consumption of product is 3 kg to the m² in the event of strong clogging, a second application can appear necessary. Never not to hesitate to consult our engineering department for a preliminary test.
Safety
Wearing of protective clothing advised (obligatory gloves, glasses) In the event of projection on the skin, to wash with large water.

rue de la Z.A.M.I.N BP 50445 - 59464 LOMME Cedex - Tél. : +33 3 20 34 42 43 / Fax : +33 3 20 34 42 49