Home
Products
Technical supports
About Us
References
Contact

FOR BUILDING

ANTI GRAFFITIS
Pelicoat Pro Stone
Pelicoat Anti Graff

WATER PROOFER
Pelicoat Pro Wall
Pelicoat Wall
Pelicoat Pro Jet

MINERALIZING

Pelicoat Pro Roc

CLEANING
Pelicoat Pro Moss
Pelicoat Pro Clean
Pelicoat Déca Pierre
Pelicoat Déca Brique
Pelicoat Neutrapierre
Pelicoat Neutrabriq
Pelicoat Décapeint
Pelicoat Décasil
Pelicoat Décap NF
Pelicoat Alunet
Pelicoat Déca Graf


FOR GROUNDS
Pelicoat Pro Stone


FOR TEXTILE
Pelicoat Textile

ANTI-GRAFFITIS FOR NONPOROUS SURFACES
PELICOAT ANTI GRAFF
Our product was especially developed to protect the surfaces subjected continuously to degradations by graffitis from all kinds. It can apply to a very great number of supports : stones, bricks, concrete, asbestos cement, marble, earthenware, tiling, aluminium, oil-based paints, cellulose, other than the piolites and of paintings to minium.

This product is particularly recommended for the protection of the supports far from porous.

The product contains organosilicic resins in solution in an organic solvent. It polymerizes by a simple air drying on treated surfaces and has the great advantage of letting breathe the support.
Characteristics
- ambré Liquid
- organosilicic Resins
- organic Solvent
- dry Extract : 13 % approximately
- Not flash : 45 C
- Density : 0,80
- Output : 1 liter for 2 to 10 m2 according to the support.
Use
- the product is used pure. One will take care to work on perfectly clean and dry supports. In protection of painted surfaces, to wait 15 days of perfect drying before carrying out the treatment.
- the application is done with the brush, the brush, the plug or the gun. It must be done until real refusal of the support: it always should be remembered that the more one makes penetrate the product in the support and the more the speed of diffusion decreases. One will start again operation 2 to 3 times according to the porosity of the support, the last application being done preferably the following day.
- drying is obtained at the end of 3 to 5 hours, at normal temperature. The optimum anti-adherence effect is obtained after 24 hours.
- the implementation will be carried out only at temperatures higher than +5C. To avoid working at temperatures higher than 35C.
- the product is preserved one year in its packing of origin.
Removal of graffitis
Graffitis must be removed using our cleaning graffitis.
rue de la Z.A.M.I.N BP 50445 - 59464 LOMME Cedex - Tél. : +33 3 20 34 42 43 / Fax : +33 3 20 34 42 49